- UniMachines
- ›
- Mechanical Presses
- ›
- Eccentric Presses
- ›
- Eccentric Presses ZTS
- ›
- Eccentric Presses ZTS LE 160
Eccentric Press ZTS LE 160
Eccentric Press ZTS LE 160 was manufactured by the machine manufacturer ZTS. Machine ZTS LE 160 was built in 1990 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1990 |
| Warranty | Without warranty |
| Technical condition | Good |
| Loading | The seller organizes the loading - included in the price of the machine |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum force (pressing) | 160 t |
| Length of the bottom working table | 995 mm |
| Width of the bottom working table | 700 mm |
| Throat depth (distance from the frame to the slider axis) | 355 mm |
| Maximum number of strokes per minute (manual work) | 20 1/min |
| Maximum number of strokes per minute (automatic work) | 45 1/min |
| Minimum length of the slider stroke | 20 mm |
| Maximum length of the slider stroke | 120 mm |
| Adjustment of the slider | 100 mm |
| Maximum distance between the table and the slider (at the lower position of the slider) | 450 mm |
| Thickness of the bolster plate | 100 mm |
| Compressed air pressure | 0.5 MPa |
| Machine height | 2587 mm |
| Machine length | 2310 mm |
| Machine width | 1270 mm |
Equipment | |
|---|---|
| Central lubrication | |
| Lighting | |
| Technical documentation | |
